Save and Upload

Online Project Upload

After scanning, click the Save button in the upper right corner of the scan page, fill in the project information as prompted, and then click Save again to save the project locally.

Find the local project you just saved and click the Upload button. If the scanner is not connected to the network, a window as shown above will appear, please follow the instructions to complete the network connection.

Once the camera is connected to the network, a message will appear asking you whether you want to generate the OBJ model (optional for TLS only) and set the project password. Click OK to start uploading.

After the calculation is completed, the project will appear in the Cloud page of the APP. Click it to open the project. Or you can log in to the 4DAGE website - Personal Center - My Scenes to view it.

Offline Project Upload

After scanning, click the Save button in the upper right corner of the scan page, fill in the project information as prompted, and then click Save again to save the project locally.
Insert the USB flash drive into the Meta. The top right corner of the App will show the USB flash drive with a check mark if it is successfully connectd.

Click Upload to upload the project to the USB flash drive, a message will appear asking you whether you want to generate the OBJ model (optional for TLS only) and set the project password. Click OK to start uploading.

The project has been transferred to a USB flash drive. Click USB Drive to check the projects that have been transferred to the USB flash drive.