### Point Adjustment Mode <!-- {docsify-ignore} -->

This function is designed to aid in the reconstruction of Tours. When the point generated in Tours deviates from the actual position, use this function to adjust the point.</br>

<h3>The steps are as follows</h3>
1.Click the point setting function in the lower left corner to jump to the point setting interface.</br>

2.The point setup interface has three function buttons:associated points, horizontal adjustment, and heightadjustment. Users can adjust the points according to theactual situation to ensure that the points fit in the correctposition.</br>

(1)Associated point: the reference point ofthe scanner' s shooting point position,which aidsin the position calculation. As the related point,the nearest point to the shooting point is typically chosen.</br>

(2)Horizontal adjustment: used to alter the last point's horizontal orientation.</br>

(3)Height adjustment: used to alter the height of the last point.</br>


3.Ensure that the position is correct, then click "Save" to finish</br>

[filename](videos/Mega-1-1-4-en.mp4 ':include :type=video width=100% height=100% controls')