update

product/4dkk-local/en-us/camera.md

@@ -1,17 +1,17 @@
-## 1. 相机授权
-找到相机授权入口，复制机器码并联系四维时代官方渠道获取相机授权Key,验证后可同步此相机的数据到电脑。<br/>
+## 1. Camera Authorization
+Find the camera authorization portal, copy the machine code and contact the official channel of 4DAGE to get the camera authorization key, after verification, you can synchronize the data of this camera with the computer.<br/>
 ![](src/local/xj-1.png)
 
-## 2. 查看相机
-相机SN码经过验证后，会在列表显示。在此列表可查看到SN码、对应同步到电脑的场景数量、最后一次同步场景的时间。<br/>
+## 2. Viewing Cameras
+After the camera's SN code is verified, it is displayed in the camera list. In this list, you can view the SN code, the number of scenes that are synchronized with the computer, and the time when the scenes were last synchronized. <br/>
 ![](src/local/xj-3.png)
 
-## 3. 相机更换
-若需要更换相机，可联系四维时代官方渠道,提供需要更换的SN码，以获取相机更换Key。更换后，原相机已同步的场景数据保持不变，但不能继续同步该相机的场景数据。<br/>
+## 3. Camera Replacement
+If you need to replace the camera, you can contact the official channel of 4DAGE and provide the SN code of the camera you need to replace to get the camera replacement key. After the replacement, the scene data that has been synchronized with the original camera will remain unchanged, but you cannot continue to synchronize the scene data of the original camera.<br/>
 ![](src/local/xj-2.png)
 
-## 4. 搜索
-输入SN码，可搜索对应四维深时相机。<br/>
+## 4. Search
+Enter the SN code to search for the corresponding camera. <br/>
 
-## 5. 刷新
-点击【刷新】，可依据最新本地场景数据显示列表数据。
+## 5. Refresh
+Click [Refresh] to display list data according to the latest local scene data.

product/4dkk-local/en-us/flashback.md

@@ -1,6 +1,6 @@
-正在计算场景时，若电脑配置不满足条件或不当操作，可能导致程序闪退。处理操作如下：
+When calculating the scene, if the computer configuration does not meet the conditions or the operation is improper, it may cause the program to flash back. The processing procedure is as follows:
 
 
-1.重新启动程序；<br/>
-2.查看托盘计算进度，若已无进度，说明计算实际已终止。<br/>
-3.在场景列表点击“暂停”，再点击“计算”，即可。<br/>
+1.Restart the software；<br/>
+2.Check the progress of the calculation in the system tray, if there is no progress, the calculation is actually finished. <br/>
+3.Click "Pause" in the scene list, then click "Calculate". <br/>

product/4dkk-local/en-us/note.md

@@ -1,17 +1,18 @@
-1. 本地版所安装的电脑，建议做安全排除，避免系统误识别为病毒。（详见添加排除项操作说明）<br/>
+1. It is recommended to add exclusions to Security on the computer where the offline version is installed to avoid the system mistakenly recognizing it as a virus. (For details, please refer to the operating instructions for adding exclusions). <br/>
 
 
-2. 关闭安全软件，避免误识别为病毒，而删除或占用安装目录内的文件。<br/>
+2. Disable security software to avoid mistakenly recognizing it as a virus and deleting or occupying files in the installation directory.<br/>
 
-3. 正常双击程序，都会以管理员身份运行。若所用电脑默认不使用管理员身份运行，请点击鼠标右键，以管理员身份运行。<br/>
+3. Normally, double-clicking the program will run it as administrator. If the computer you are using does not run as administrator by default, right-click to run as administrator.<br/>
 ![](src/local/tips-1.png)
 
-4. 请不要禁用电脑以太网连接，导致无法获知授权状态。<br/>
+4. Do not disable the computer's Ethernet connection, which makes it impossible to know the authorization status. <br/>
 ![](src/local/tips-2.png)
 
-5. 设置从不休眠，避免计算过程中休眠导致计算失败。（详见操作说明）<br/>
+5. Set Never Hibernate to avoid hibernating during calculations, which can cause failure of the calculation. (See the operating instructions for details)<br/>
 
 
-6. 计算过程中请保持电源连接，避免电量不足关键导致计算失败。<br/>
+6. Please keep the power on during the calculation process to prevent the calculation from failing due to insufficient power. <br/>
 
-7. 从深时相机同步场景到U盘再到App本地，补拍时。前提是深时相机内对应的场景数据未被删除。<br/>
+7. When adding new shooting points or replacing shooting points in the original scene, you can synchronize the scene from the camera to the software using a USB flash drive, provided that the original corresponding scene data has not been deleted from the camera.
+<br/>

product/4dkk-local/en-us/securitySoftware.md

@@ -1,22 +1,22 @@
-安装完四维深时本地版后，安装路径下的部分文件可能会被电脑安全软件误识别为病毒而直接删除。此时Windows系统会出现如下威胁提示。<br/>
+After installing the offline version, some of the files in the installation path may be mistakenly detected as viruses by computer security software and deleted immediately. The Windows system will display the following threat prompt. <br/>
 
-## 1.电脑管家
-1. 打开电脑管家<br/>
+## 1.Guanjia
+1. Open the Guanjia.<br/>
 ![](src/local/security-1.png)
 
-2. 点击病毒查杀-->信任区-->添加文件夹-->将深时目录添加-->点击确定。<br/>
+2. Click Virus Detection -> Trust Zone -> Add Folder -> Add Camera Directory -> Click OK.<br/>
 ![](src/local/security-2.png)
 
-## 2.360电脑管家
-1. 首先打开360安全卫士<br/>
+## 2.360 Weishi
+1. Open the 360 Weishi. <br/>
 ![](src/local/security-3.png)
 
-2. 单机“木马查杀”——“信任区”<br/>
+2. Click "Trojan Horse Detection" - "Trust Zone". <br/>
 
 ![](src/local/security-4.png)
 
-3. 进入信任界面后，点击“添加信任目录”或“添加信任文件”<br/>
+3. After entering the Trust Zone, click "Add Trusted Directory" or "Add Trusted File". <br/>
 ![](src/local/security-5.png)
 
-4. 添加要信任的目录<br/>
-5. 弹出提示，点击“确定”即可<br/>
+4. Add a trusted directory. <br/>
+5. A pop-up prompt will appear, click "OK". <br/>

product/4dkk-local/en-us/winSetting.md

@@ -1,39 +1,39 @@
-## 问题描述
-安装完四维深时本地版后，安装路径下的部分文件可能会被电脑安全软件误识别为病毒而直接删除。此时Windows系统会出现如下威胁提示。<br />
+## Problem description
+After installing the offline version, some of the files in the installation path may be mistakenly detected as viruses by computer security software and deleted immediately. The Windows system will display the following threat prompt. <br />
 ![](src/local/faq-1.png)
 
-## 1.处理步骤
-1. 点击查看威胁<br />
+## 1.Processing step
+1. Click to view threats.<br />
 ![](src/local/faq-2.png)
 
-2. 若未看到威胁提示，可从Windows安全中心进入。<br />
+2. If you do not see the threat alert, you can access it from the Windows Security. <br />
 ![](src/local/faq-3.png)
 
-3. 在Windows威胁提示选择恢复操作。<br />
+3. Select Recovery at Windows threat prompt.<br />
 ![](src/local/faq-4.png)
 
 
-## 2.预防方案1：关闭防护（离线环境使用时，可直接关闭）
-1. 进入安全中心<br />
+## 2.Preventive programs 1：Shutdown protection (for use in offline environments)
+1. Go to Security<br />
 ![](src/local/faq-5.png)
 
-2. 进入“病毒和威胁防护”<br />
+2. Go to "Virus and Threat Protection"<br />
 ![](src/local/faq-6.png)
 
-3. 进入“病毒和威胁防护”设置下的“管理设置”。<br />
+3. Go to "Management Settings" under "Virus and Threat Protection" settings.<br />
 ![](src/local/faq-7.png)
 
-4. 关闭实时保护。（关闭只是暂时的，系统会自动开启）<br />
+4. Turn off real-time protection. (Turning it off is temporary; the system will turn it on automatically). <br />
 ![](src/local/faq-8.png)
 
-## 3.预防方案2：主动添加排除项（排除安装目录）
-在出现误删前可主动设置排除项，避免误删。操作如下。<br/>
-1. 还是在“病毒和威胁防护”设置，添加“排除项”。<br />
+## 3.Preventive programs 2：Add exclusions (to exclude the installation directory).
+You can set up exclusions to prevent accidental deletion before it happens. The procedure is as follows.<br/>
+1. In the "Virus and Threat Protection", add "Exclusions". <br />
 ![](src/local/faq-9.png)
 
-2. 排除文件夹<br />
+2. Select Folder.<br />
 ![](src/local/faq-10.png)
 
-3. 选择安装目录的文件夹<br />
+3. Select the folder of the installation directory.<br />
 
 ![](src/local/faq-11.png)